An electric hoist is a large equipment that makes operations more efficient and production flow more smoothly. They aid in the reduction of accidents and, when used properly, protect your employees from long-term injury.
Mistakes to Avoid to Buy the Right Electric Hoist
There are hundreds of various hoist brands, varieties, and sizes available around the world, each one better adapted for specific purposes and circumstances. When we’re out on the field, the most typical blunder we encounter is an inappropriate hoist being used for an inappropriate application.
When it comes to buying an electric hoist, one of the most crucial factors that can’t be overlooked at any cost is the COST! Cutting costs might save a few dollars, though, can backfire.
Here is a list of the few most common hoists buying mistakes that should be avoided—
Mistake 1-
Investing in an electric chain hoist that is extremely slow for the project can slow down the overall performance of the worksite. Lesser horsepower and a reduced cost are the results of a reduced speed. This may appear to be a wonderful idea on paper, but keep an eye out for concerns from manufacturing line workers.
The tasks take a longer time to get completed because they work at a much slower speed. Assess the speed of the unit you’re upgrading to minimize downtime. Otherwise, if unsure, contact the operator!
Mistake 2-
Invest in a push trolley and not in a motorized trolley. Here’s a common rule to follow while buying a trolley: A push trolley will suffice if the worker can carefully push on the weight under all circumstances.
A motor-driven trolley is essential if the load is hazardous to carry, if there is a gap in the floor, or if the user wanted to stand back from the payload.
Mistake 3-
Purchasing a manual hoist for a prolonged lifting job. Manual hoists, which lift and drop a cargo by pulling a hand chain, are intended for use at relatively modest heights. A motorized hoist is recommended for lifts exceeding 20 feet.
Mistake 4-
Buying a bespoke HITACHI electric hoist with an unsuitable finish for the surroundings. Most suppliers finish their regular hoists with paint that is acceptable for inside use.
A special treatment (for instance, finish coat, primer, and/or lacquer topcoat) seems to be well worth the additional expense if you need lifting equipment for outside uses or in a place where strong chemicals are found.
Don’t ever, ever buy a custom hoist that hasn’t been finished. While skipping the paint cost may appear to be a cost-cutting measure, the device will almost certainly corrode before it reaches your production floor.
Mistake 5-
For a dangerous area, get a conventional electric hoist. Hazardous areas are classified by Category, Group, and Sector by the relevant departments. Electric hoists and trolleys should be custom-built to meet the needs of the specific application. In a dangerous site, using a normal hoist could result in a disastrous accident.
Mistake 6-
When a real vertical lift is needed, purchasing a single reeved hoist is the best option. True vertical lift as well as double reeved wire rope hoists are required if an item must be placed perfectly in one location. Single-reeved wire rope hoists are suitable for any purpose where “hook drift” is acceptable – that is, where the wire rope cable travels on and off the drum as the hook is raised and lowered.
Buy Material Handling Equipment at MIT Hoist
With many years in the business, we know overhead material handling! MIT Hoist supplies a variety of overhead lifting equipment, such as bridge cranes and hoists, along with related services.
From HITACHI electric hoist, electric chain hoist to cable festoon system, conductor bar systems, and a lot of other material handling equipment, we are the best in the market.
Contact us for more information.