Whenever it comes to heavy lifting equipment like an overhead crane, electric hoists etc it is important to handle this machinery with care. A little ignorance or carelessness can lead to bigger damages which will cost you a lot to repair.
Hence, it is always good to avoid the damage and be a little careful. In order to avoid this one of the best ways considered is to be aware of the common causes of damage and look for them on regular basis.
Regular check and analysis can help in preventing these damages which will prove highly efficient and productive for your industry. Hence, it is always important to look out for the same. So, without waiting any further let us have a look at these common damage causing issues from leading overhead crane suppliers:
Wire Rope Damage:
One of the most common damages that occur in overhead cranes is the damage or degradation of wire rope. This happens because of ineffective use of the rope and lack of maintenance activities.
Wire rope damage if not checked at earliest gets only worse with time. Hence, it is extremely important to check for the rope damage and handle it at its earliest. Regular check and maintenance is the most-effective proven measure to prevent wire rope damage.
Hence, do proper check and make sure that you do not come across these damages.
Fault in Electrification System:
If there is any kind of issue or consistency with the electrification system then it is sure to do damage to your crane system. It might be voltage fluctuations or problems with the fuse. In any case, it could bring down the quality and performance of the crane or hoist.
This is why leading overhead crane manufacturers always suggest to check the power supply system and ensure that everything is working fine. Regular service of the electrification system is also a good practice to avoid any kind of irregularities.
Alignment Issues:
Another common reason for damage in a crane or its parts is improper alignment of the crane parts. If the crane is not properly installed and all the parts are not properly aligned then it is sure to cause issues with the working of the crane.
Irregular alignments can also lead to damage in the crane parts. This could also lead to accidents at the working site. Hence, it is extremely important to check for the same both from the performance perspective and safety concern.
Wear & Tear of End Truck Wheels:
Another common damage factor which results in bad crane performance is wear and tear of the crane end truck wheels. If the runaway system is not properly installed or aligned or there is an excessive collision between the track path and crane wheels it could lead to huge damage.
So, check for these common issues as suggested by leading overhead crane suppliers and ensure that these do not happen in your industry. We hope that this information has proved useful for you.