Understand the truth about a few common misconceptions about the use of an overhead crane for safety, and you’ll know how to operate it safely. When utilizing any form of lifting equipment, you should always be mindful of the most recent health and safety regulations, have a proper lifting strategy, and be careful and aware.
Just like any other piece of heavy equipment, an overhead crane and a JIB crane may be dangerous tools if not utilized properly. Every job site has its own safety requirements and worker safety procedures, but it is important to take precautions to strategically prevent accidents by following all established safety procedures.
Overhead crane operators and site managers may occasionally grow confident and competent and try to deviate from accepted best practices and safety regulations, frequently with disastrous results.
Common Myths About Overhead Cranes
Here are three widespread misconceptions about using overhead cranes that can damage your machinery and, worse, put you and other people at risk.
Side-pull: It is acceptable to use a crane to hoist an item horizontally
An overhead crane is intended to lift and position objects directly underneath it. It could be intriguing to hoist anything that is close but not precisely underneath it. You might believe that you have extra rope and that the JIB crane can support its weight.
Side-pulling is an extremely reckless move since it pushes the machine past its mechanical capabilities. Side-pulling puts both your co-workers and bystanders in considerable danger. The rope may swing uncomfortably and may break under extreme strain. In addition, side-pulling can harm the machine in a number of other ways.
Routine daily checks: The crane was used yesterday; it should be operational today
Every day, before usage, machinery and equipment must be examined due to their intricate parts and fragile parts. A manager or operator should be required to perform a number of fundamental checks and record these in a file as per standardized protocol.
To save time and energy, many businesses skip this stage and erroneously believe the machine is in a great place and working. A mishap can be avoided with even a quick examination.
Check the device for any odd noises or jerky movements. Verify that the crane’s components are all properly fastened and that nothing is loose or damaged. Ensure the controls are tested to ensure proper button operation. Only one specific person should be in communication with the construction site. It can be disastrous if there are too many people directing and instructing the operator.
Load limit: The load limit can be increased by a few tonnes
There is a reason why every overhead crane has a load-bearing capacity. Anybody present at the job site could be put at risk and the equipment could be damaged if an attempt was made to elevate an object over the advised capacity.
Even while certain overhead cranes have a carrying capacity built in, the machine might still experience a great deal of stress and break down. Most cranes can be equipped with weight-weighing equipment to help you determine how much maximum weight you have available.
These beliefs may seem rational and basic logic, but they still contribute significantly to accidents and property damage on construction sites. You may secure your machinery and make your construction site better by careful assessment of these.
Partner with a Reputed Overhead Crane Manufacturer
It is the first task you must complete. Ensure your investigation is thorough enough to enable you to choose the top crane and manufacturers, such as MIT Hoist.
Once you’ve done that, you will have many options for contacting them. You can reach them by phone or email. You’ll notice a few things as you get closer to them.
They will give you an overview of their business and inform you of their skills.
By providing you with examples of comparable work, they will demonstrate that the organization is qualified to carry out the order or project.
Looking for a reliable light crane system, JIB crane, or overhead crane manufacturer?
MIT Hoist is the right partner!